RoboVent FloorSaver Series, Руководство пользователя

Страница: 11 / 60

ROBOVENT • DFS SERIES OWNER’S MANUAL 10
The DFS Series Collectors are a compact, continuous
duty, self-contained dust collector. The units consist
of a housing with blower, motor, integral silencer, filter
cartridges, spark arrester baffles and pulse cleaning
system. (see Figure 9).
The Filter Self-Cleaning System (FSS)
The DFS Series is a reverse jet-pulse dust collector
with a powerful Filter Self-Cleaning System (FSS).
The FSS utilizes a calculated reverse jet-pulse of air
into the inner core of the cartridge filter. (see Figure
10). This shock wave of reverse air will dislodge
particulate that has caked on the outside of the
cartridge filter. As the filter cartridges are mounted
vertically, the dislodged dust eventually works its
way down to the lower collection tray. This process
reconditions the filter media and can prolong
cartridge life for several months (filter life depends
upon your application).
General Operation
Dust and smoke laden air is drawn through the floor
of an enlarged intake plenum where it passes through
a dual layered spark arrestor before entering the
cartridge plenum. Dust particles are then collected on
the surface of the pleated filter cartridges as air flows
through the high efficiency media and into the clean air
duct. Recycled air is then exhausted by the blower fan
through an acoustically designed motor plenum.
To operate your new DFS unit, you will need to connect
both electrical power and compressed air.
See
“Installation”
.
SECTION 400
General Description: DFS Series Collectors
FIGURE 9
DIRTY
AIR
DIRTY
AIR
CLEAN
AIR
FIGURE 10