RoboVent CLARION CFX Series, Руководство пользователя

Страница: 9 / 38

ROBOVENT • CLARION SERIES OWNER’S MANUAL 9
Receiving
RoboVent Equipment is typically shipped on skids or in crates. The number of skids/crates will vary,
depending on the type, size and accessories ordered. These skids/crates are too heavy to lift by hand, and
will need to be unloaded by an industrial fork-truck or similar equipment.
Inspection
A visual inspection of your equipment should be performed before it is removed from the truck. Dents,
scratches, and other damages should be noted on the shipping documents, and also photographed.
The structural integrity of the housing can be adversely affected by large dents. RoboVent should be
immediately notified of any structural damage to your equipment. It is the purchaser’s responsibility to
file shortage reports and damage claims with the carrier and with your RoboVent Representative. The
carrier is responsible for any damage to the equipment while it is in transit unless specific arrangements
are made otherwise.
Compare the number of items received against the carrier’s bill of lading. Inspect all
items for apparent damage. Immediately report any shortages or obvious damage to the carrier and to your local
RoboVent Representative, call the factory at 1-(888)-762-6836,
or email: customer.service@robovent.com.
When all skids are completely unpacked and uncrated, check all items received against the packing lists. Further
inspect the unit and components for hidden damage. Again, report any shortage or damage to the carrier and to
your local RoboVent Representative.
The filter cartridges are typically shipped installed in your collector. Be sure to check them for alignment, as they
may have shifted during transit. If they have shifted, it is possible that damage may have been done. Remove all
filter cartridges and inspect thoroughly.
Note: Do not return any damaged components without first contacting your RoboVent Representative
to obtain a Returned Goods Authorization (RGA).
Small Parts
Carefully inspect all packing material before it is discarded, to be sure that no small parts have been missed.
SECTION 300
Receiving & Inspection