Robotis Dynamixel X Series Скачать руководство пользователя страница 23

Страница: 23 / 34

Mode

Values

Description

Position Control Mode

Min Position Limit(52) ~ Max Position Limit(48) Initial Value : 0 ~ 4,095

Extended Position Control Mode

-1,048,575 ~ 1,048,575

-256[rev] ~ 256[rev]

Degree Conversion Constant

Description

0.088°/Value

1[rev] : 0 ~ 4,095

NOTE

: Profile Velocity(112) and

Profile Acceleration(108)

are applied in below cases:

In Position Control Mode, Profile Velocity(112) and

Profile Acceleration(108)

are used to create a new

profile when Goal Position(116) is updated.
In Velocity Control Mode,

Profile Acceleration(108)

is used to create a new profile when Goal

Velocity(104) is updated.

NOTE

: When turning off the power supply or changing Operation Mode on Extended Position Control

Mode, the value of Present Position is reset to the absolute position value of single turn .

NOTE

Present Position(132)

represents 4 byte continuous range from -2,147,483,648 to

2,147,483,647 when Torque is turned off regardless of

Operating Mode(11)

However,

Present Position(132)

will be reset to an absolute position value of one full rotation in those

cases:

1. When

Operating Mode(11)

is changed to Position Control Mode,

Present Position(132)

will be

reset to an absolute position value of a full rotation.

2. When torque is turned on in Position Control Mode,

Present Position(132)

will be reset to an

absolute position value of one full rotation.

3. When turning off the power supply on Extended Position Control Mode,

Present Position(132)

will

be reset to an absolute position value of one full rotation.

Present Position(132)

value can be affected by

Homing Offset(20)

2. 4. 31. Realtime Tick(120)

This value indicates DYNAMIXEL’s time.

Unit Value Range

Description

1 ms

0 ~ 32,767

The value resets to ‘0’ when it exceeds 32,767

Содержание Dynamixel X Series



































Результаты поиска

Содержание Dynamixel X Series

Отзывы:

Похожие инструкции для Dynamixel X Series

Бренды по названию

Популярные бренды

Robotis Dynamixel X Series, Руководство пользователя

Результаты поиска

Содержание Dynamixel X Series

Отзывы:

Похожие инструкции для Dynamixel X Series

Бренды по названию

Популярные бренды