Robotis Comprehensive Kit Robot Series, Быстрый старт

Страница: 190 / 197

Comprehensive Kit Robot Series
Step g up the Joint Offset at the first time, double-click the “Original Robot.” If 3 When settin
not,
been
S following pictures. robot by adjusting the joint.
double-click the “User Robot”to tune the previous Joint Offset. (If the Motion Editor has
newly downloaded, double-click the“Original Robot”)
When setting up the
Offset at f
For adjusting the
previous Joint Offset, Joint irst time,
double click this icon. double click this icon
tep 4 Make sure that the robot is same as the
※Front View ※Rear View
The robot must stand
※Side View ※Side View of Leg
Left and right sides must be balanced when viewed from
the side.
The robot must stand perpendicular to the surface
and the hip and the ankle areas must be parallel.
perpendicular to the surface as
shown in the left picture
190