ROBOTIQ 2F-140 Скачать руководство пользователя страница 17

Страница: 17 / 99

2F-85 & 2F-140 - Instruction Manual

3.1. Scope of Delivery

Caution

The following is not included as part of a standard delivery:

Options such as adapter plates or couplings for mounting on various industrial robots, fingertips.

Hardware required for options; accessories or fixtures for the gripper, unless specified.

Power supply units, power supply wiring or fuses.

Info

When bought as a kit, the gripper will come in a package with the appropriate coupling, fingers/fingertips and cabling.

Please refer to the Spare Parts, Kits and Accessories section.

3.1.1. General Kit

A gripper Kit generally includes these items:

Robotiq 2-Finger Adaptive Gripper

Coupling

Robotiq device cable

USB to RS485 signal converter

Screw Kit

Fig. 3-1: Schema of the required hardware.

Depending on the robot, an adapter plate might be available. Refer to the Couplings section for more details.

Содержание 2F-140




































































































Результаты поиска

Содержание 2F-140

Отзывы:

ROBOTIQ 2F-140, Руководство пользователя, Страница: 17 / 99

Результаты поиска

Содержание 2F-140

Отзывы: