21
22.)
Bolt on the top and bottom trim pieces using seven 6-32 x 1/4” flat head cap
screws per side as shown. NOTE: Do not insert them into the holes shown below
which do not have them. We will use 6-32 x 1/2” flat head cap screws in the
empty holes in the next step.
23.)
Bolt on the upper deck using four 6-32 x 1/2” flat head cap screws thru each side
plate as shown below.
©2004-2005 Summerour Robotics Corporation – Botster™ Assembly Manual Version 1.4 – 05/15/2005.
Botster™ and Botster Brand™ are Trademarks of Summerour Robotics Corporation 2004-2005.
