2
BEFORE YOU BEGIN
ASSEMBLING BOTSTER™…
IMPORTANT -
PLEASE DO NOT USE ANY POWER TOOLS TO ASSEMBLE YOUR KIT. Use
only the required held phillips head screwdriver and hex wrenches.
NOTICE: We will not warranty any parts with stripped out holes, for which you have stripped
out using power tools.
The plastic material that our kits are manufactured out of has been tested to ensure that it
provides enough strength to withstand typical hand torquing of screws, and provide sufficient
wear characteristics for typical insertions and removals of screws.
Once the screw is “seated” on the plastic, apply a 1/8 turn (45 degrees of clockwise rotation)
of the screwdriver and STOP. DO NOT apply any more torque. We define “seated” as when
the bottom of the screw head comes in contact with the plastic.
Also, our kits are designed so as to not require the user to have to frequently remove screws
to get to other parts of the kit. So, once the kit is together, leaving it together will help
prolong the life of it.
We believe you will be very pleased with the solidity and rigidity of the assembled kit.
©2004-2005 Summerour Robotics Corporation – Botster™ Assembly Manual Version 1.4 – 05/15/2005.
Botster™ and Botster Brand™ are Trademarks of Summerour Robotics Corporation 2004-2005.
