24
26.)
Thread in two 6-32 x 1/2” flat head cap screws into the two countersunk holes in
the top of the lower rear vertical deck and bolt it into the upper deck as shown.
You an simply takes these out to insert/remove batteries as needed.
27.)
Stretch the included traction bands around the Botster wheels. You’ll have to
stretch and tug to get the band centered perfectly. Once it’s centered, it should
easily stay in that position, even while driving.
28.)
Bolt on the Botster’s™ wheels using the black servo screws in the ends of the
splined servo shafts.
©2004-2005 Summerour Robotics Corporation – Botster™ Assembly Manual Version 1.4 – 05/15/2005.
Botster™ and Botster Brand™ are Trademarks of Summerour Robotics Corporation 2004-2005.
