Robot Coupe R 402, Руководство пользователя

Страница: 8 / 30

3) Engage the blade on
the motor shaft and lower
it right to the bottom of the
bowl.
Make sure that it is correctly
positioned, by rotating it in
the bowl.
4) Place the lid on the bowl
and rotate to the right until
it clicks.
The device is now ready for use. The green light
should therefore be illuminated.
• VEGETaBLE PrEParaTION aTTaCHmENT
The vegetable preparation attachment consists of
two detachable parts: the stainless steel vegetable
preparation bowl and the lid.
1) With the motor base
facing you, fit the stainless
steel bowl onto the motor
base; the ejection chute
should be on your right.
2) Turn the bowl to the
right until the motor base
connectors are securely
positioned in their sockets.
22
r 402
Red switch = Off switch
Green switch = On switch
Black switch = Pulse control
Speed selector single phase r 402
50 Hz : 500 or 1,500 rpm.
60 Hz : 600 or 1,800 rpm.
Speed selector
Three phase r 402
50 Hz : 750 or 1,500 rpm.
60 Hz : 900 or 1,800 rpm.
r 402 V.V. :
Speed variation for
cutter bowl
from
300 to 3,500 rpm.
for
vegetable preparation
from
300 to 1,000 rpm.
assEmBLy
• CuTTEr BOWL aTTaCHmENT
1) With the motor base
facing you, make sure
that the bowl is straight in
relation to the motor shaft,
with the magnetic bar
moved slightly to the left.
2) Turn the bowl to the
right until the motor base
connectors are securely
positioned in their soc kets.
The handle is now in front
of you.
3) Slot the grey plastic
ejector disc onto the motor
shaft and check that it is
properly positioned at the
bottom of the bowl.
4) Choice of disc:
a) If you have opted for a
slicing, grating or julienne
disc:
Position the disc on the sling
plate.
Only for the r 402 / r 402 V.V. models:
b) If you have chosen the
dicing equipment:
i.e. a
grid and slicing disc.
you must only use the
8-mm, 10-mm or 12-mm
aluminium slicing discs with
the dicing grids.
Make sure the dicing grid is correctly positioned in
the veg prep bowl (see page 23).
Check that the notch on the edge of the dicing grid
is correctly positioned over the tab on the bowl (see
marking on grid).