7
english
You will find all the combinations marked
•
on our
machines and accessories price list.
The dimensions of the dicing grid should always be
equal to or greater than those of the slicing disc.
Place the dicing grid in
the bowl of the vegetable
processor.
Make sure that the tab on
the grid is fully engaged
in the locking slot of the
motor unit.
❷
position your chosen disc:
a) If you have opted
for a slicing, grating or
julienne disc:
position the disc on the
motor shaft. To ensure that
it is correctly positioned,
turn it in a clockwise
direction.
b) You have chosen a dicing equipment:
i.e. a grid and a special slicing disc for diced
vegetables.
Slicing discs and dicing grids can be mounted in
the following combinations:
Gray shaded areas are acceptable combinations of
slicing plate plus dicing grid.
Position the French fries
grid in the vegetable
preparation bowl.
Make sure that the French
fries plate is correctly
positioned in the locking
slot of the motor unit.
When the removable divider is in place, there is no
need to use additional tools, such as loading cone
and cabbage cutter.
Next, fit the correspon-
ding slicing disc (straight-
edged blade) and rotate
in a clockwise direction to
ensure that it is correctly
positioned.
c) If you want to use the french fries equipment:
This equipment comprises a French fries grid and a
special French fries slicing disc.
W A R n I n g
To avoid build-up of product
between disk and grid cutting
French fries, remember to insert
the removable divider
in the
hopper and load the potatoes
into the left-hand compartment
(see photo opposite).
CAUtIOn:
use the wrench supplied
with the appliance to remove the
cabbage corer.
❹
Inser t the hinge
pin
into the locations
provided at the back of
the motor base.
The locking handle should
now be facing you, on the
right.
Loading cone
Cabbage cutter
Next fit the French Fry
slicing disk and rotate in
a clockwise direction to
check that it is correctly
positioned.
Fit the removable divider
into the feel lid when the
French Fry kit is used. Do
not use loading cone or
cabbage cutter with French Fry cutter.
❸
Then, screw the loading cone or the cabbage
cutter onto the motor shaft according to the type of
vegetable to be prepared (unless using the removable
divider).
It should be remembered that the loading cone is
suitable for all types of vegetables except for cabbage
and vegetables larger than 3 inches diameter. The
cabbage cutter is designed for that purpose.
Slicer
5x5 mm
(3/16”x 3/16”)
8x8 mm
(5/16”x 5/16”)
10x10 mm
(3/8”x 3/8”)
14x14 mm
(9/16”x 9/16”)
20x20 mm
(25/32”x 25/32”)
25x25 mm
(1”x 1”)
5 mm
(3/16”)
•
•
•
•
•
•
8 mm
(5/16”)
•
•
•
•
•
•
10 mm
(3/8”)
•
•
•
•
•
•
14 mm
(9/16”)
•
•
•
•
•
•
20 mm
(25/32”)
•
•
•
•
•
•
25 mm
(1”)
•
•
•
•
•
•
Dicing grid