Robot Coupe Blixer 3, Руководство пользователя

Страница: 10 / 17

9
18/09/2017
The motor seal can be easily replaced without
having to remove the motor, so we strongly advise
you to ensure that it is in good condition.
• LOCKING WASHER ASSEMBLY
The locking washer assembly is located on the
lower inside of the bowl and holds the bowl
in place. If it becomes worn, it needs to be
replaced.
• SCRAPER ARM
The scraper arm is equipped with rubber pieces
which are wearing parts. They should be replaced
occasionally to always ensure an optimum
efficiency of the scraper arm.
These pieces are easy to dismantle and to
reassemble.
MAINTENANCE
• BLADE
The quality of the cut depends mainly on the
sharpness of your blades and the degree of wear.
The blades are actually wearing parts, which
should be replaced occasionally to ensure consistent
quality in the final product.
• MOTOR SEAL
The motor seal around the motor shaft should be
lubricated regularly using a food safe lubricant.
In order to keep the motor completely watertight,
it is advisable to check the motor seal regularly for
wear and tear and replace it if necessary.
Rubber piece to
scrape the bowl
Rubber pieces to
scrape the lid.
Drawing 1
Drawing 2
Drawing 3
Check that your detergent is suitable for
cleaning plastic parts. Some washing agents
are too alkaline (e.g. high levels of caustic
soda or ammonia) and totally incompatible
with certain types of plastic, causing them to
deteriorate rapidly.
I M P O R T A N T
Then wash the blade in the dishwasher.
After washing, always wipe the blade well in order
to prevent oxidation.
• SCRAPER ARM
To clean the scraper arm, dismantle it as follows.
Hold the scraper arm in one hand and the hub in
the other hand (drawing1). Press the two pieces
one on the other, and turn the handle of 45°
anticlockwise (drawing 2). Then it is possible to pull
out the two pieces (the scraper arm and the handle)
from the lid and clean them (drawing 3).