Roborock E5, Руководство пользователя

Страница: 22 / 216

22
Instructions for Use
Pause
When the robot is cleaning, press any button to pause it.
Press the button to continue cleaning or the button to stop
cleaning and send it back to the Charging Dock.
•
Manually docking the robot in Pause mode will stop the current cleaning cycle.
• If continuing to clean after moving the robot, place it close to its original position before
starting.
Note:
If the robot cannot find the Charging Dock, it will return to the most recent starting
location. Place the robot on the Charging Dock manually to recharge.
Note:
Charging
Auto mode: After cleaning, the robot will automatically return to
the Charging Dock.
Manual: If Paused, press the button to send the robot back to
the Charging Dock.
The Power Indicator of the robot breathes when the robot is
charging.
Cleaning Route
Once started, the robot will clean in a Z pattern. Once all areas
have been covered, it will clean along the wall to effectively cover
the entire floor. It will then automatically return to the Charging
Dock.
Refilling the water tank or cleaning the
mop cloth
To add water or clean the mop cloth, press any button to stop the
robot and remove the mopping module. After adding water or
cleaning the mop cloth, reinstall the mopping module and press
the button to continue.