Robomower RL350 Скачать руководство пользователя страница 5

Страница: 5 / 56

The products are manufactured by F. Robotics Acquisitions (Friendly Robotics).

reproduced, electronically or translated without the prior written consent of Friendly Robotics.

Product, product specifications and this document are subject to change without notice. All other

trademarks are property of their respective owners.

CE approved.

Welcome to the world of home robotics with the Friendly Robotics RoboMower!

Thank you for purchasing our product. We know that you will enjoy the extra free time you will have while

using RoboMower to mow your lawn. When set up and used properly, RoboMower will operate safely on

your lawn and provide you with a quality of cut matched by a few mowers of any kind. You will be

impressed with your lawn’s appearance and best of all, RoboMower did it for you.

IMPORTANT!

The following pages contain important safety and operating instructions.

Please read and follow all instructions in this manual. Carefully read and

review all safety instructions, warnings and cautions contained in this manual.

Failure to read and follow these instructions, warnings and cautionary statements

may result in severe injury or death to persons and pets or damage to personal property.

Содержание RL350

























































Результаты поиска

Содержание RL350

Отзывы:

Похожие инструкции для RL350

Бренды по названию

Популярные бренды

Robomower RL350, Инструкция по эксплуатации и безопасности

Результаты поиска

Содержание RL350

Отзывы:

Похожие инструкции для RL350

Бренды по названию

Популярные бренды