Robomower MS1000 Скачать руководство пользователя страница 2

Страница: 2 / 54

Robomow RS models

The products are manufactured by F. Robotics Acquisitions (Friendly Robotics).

CE approved.

transmitted or translated without the prior written consent of Friendly Robotics.

Product, product specifications and this document are subject to change without notice. All other trademarks are property of

their respective owners.

Welcome to the world of home robotics with the Friendly Robotics Robomow!

Thank you for purchasing our product. We know that you will enjoy the extra free time you will have while using Robomow to mow your

lawn. When set up and used properly, Robomow will operate safely on your lawn and provide you with a quality of cut matched by a

few mowers of any kind. You will be impressed with your lawn’s appearance and best of all, Robomow did it for you.

IMPORTANT!

The following pages contain important safety and operating instructions. Please read and follow all instructions in this

manual. Carefully read and review all safety instructions, warnings and cautions contained in this manual. Failure to

read and follow these instructions, warnings and cautionary statements may result in severe injury or death to persons

and pets or damage to personal property.

- EU Declaration of Conformity

Manufacturer: F. Robotics Acquisitions Ltd.

Hatzabar St., Industrial Zone

P.O.Box 1412 Pardesiya,

42815 Israel

The products covered by this Declaration

26 Volt Battery operated Robotic Lawn Mower model:

Robomow RS models (with Base Station)

F. Robotics Acquisitions

Ltd. declares under sole responsibility that the products identified above conform to the Directives below:

- Machinery Directive 2006/42/EC

Standards referenced: EN ISO 12100:2010.

- EMC Directive 2004/108/EC

Standards referenced: EN 55014-1:2011. EN 55014-2:2008. EN 61000-3-2:2006. EN 61000-3-3:2008.

- Noise Directive 2000/14/EC

Standards referenced: BS EN ISO 3744:2010. ISO 11094:1991.

- RoHS Directive 2011/65/EU.

Technical file representative:

Mr. Gerome De Schutter Friendly Robotics BV.
Address: Expeditieweg 4-6, Andelst 6673, Netherlands.

I hereby declare that the above product conforms to the requirements as specified above.

Shai Abramson – Senior VP R&D

F. Robotics Acquisitions Ltd.

Israel

26 November 2013

Содержание MS1000























































Результаты поиска

Содержание MS1000

Отзывы:

Похожие инструкции для MS1000

Бренды по названию

Популярные бренды

Robomower MS1000, Руководство по эксплуатации

Результаты поиска

Содержание MS1000

Отзывы:

Похожие инструкции для MS1000

Бренды по названию

Популярные бренды