Robomow Tuscania 200, Руководство пользователя, Страница: 78 / 214

EN
36
5.7 Batteries Replacement
WARNING!
Follow the instructions below. Complete replacement of one battery before starting to replace the
second battery.
Replacing the batteries:
- Lift the bumper and remove the batteries
fuse;
- Remove the cutting height adjustment knob
by lifting it upwards (figure 5.4)
- Unscrew the five nuts manually at the rear
side of the Chassis cover (figure 5.5). If you
find it difficult use a wide flat screwdriver;
- Lift the rear side of the cover (see figure 5.6) and
disconnect only the two cables from the left battery
(figure 5.7);
Place the new battery and connect the cables to the
battery tabs when the red and the black cables are
fitted to the color on the battery;
- Disconnect the cables from the right battery;
- Place the new battery and slightly crimp the battery
connectors with plyers, so that they fit tightly on the
battery tabs.
- Connect the cables to the battery tabs respectively by
color;
- Place the cover back in its position and screw the five
nuts manually, confirm they are tight enough;
- Insert the batteries fuse and confirm the Robomow
wakes up.
-
Figure 5.4
Figure 5.5
Figure 5.6
Figure 5.7