FL150-3 User Manual
Page 04
1
125 mm
2 . 0 I n s t a l l a t i o n i n s t r u c t i o n s
Unpack the unit, and make sure that the grounded power supply cord is suitable for your country. The light
generator is prepared for universal power input, capable of running from 100 - 240 V (nominal) 50 or 60 Hz.
1.
Insert the fiber harness’ common end fully into the output port of the light generator.
2.
Tighten the grille screw with the supplied Allen key, which is stored in the lid.
3.
Connect the power supply lead into the back of the light source.
Note.
Before switching on, make sure that the requirements from the installation instructions
are observed.
2 . 1 G e n e r a l m o u n t i n g o f t h e F L 1 5 0 - 3
Are available for mounting two unidirectional keyholes (1) with a distance of
125 mm. The keyholes are suitable for screws with a head diameter of max. Ø9 mm.
One of the keyholes is accessible from the inside of the light generator for
fastening the mounting screw.
Free-standing on a shelf:
Ceiling suspension - upside down:
Horizontally wall mounted: Vertically wall mounted:
Note.
When installing in any direction, please make sure that the hot air from
one light generator does not blow directly into the air intake of the
light generator next to it.
