Robland Z500 EL, Руководство пользователя

Страница: 4 / 64

4
V0818 Z500-serie
English Deutsch
Operating instructions
The following recommendations for safe working procedures are given as an example, on top of all
information characteristic of this machine.
- When working with the machine, safety equipment must be used.
-
Nevertheless, the user must also follow the operating instructions to avoid accidents.
1 Training of machine users
It is absolutely essential that the panel saw user receives thorough training regarding operating and
adjusting the machine.
In particular:
a) the risks involved in working with the machine;
b) the operating principles, the correct usage and adjustment of the machine;
c) the correct choice of the tools for each operation;
d) the safe handling of parts to be processed;
e) the position of the hands in relation to the sawblade;
f) storing the workpieces safely before and after sawing them.
2 Stability
In order to be able to use the machine safely, it is essential to place it stably on the ground or other
stable surface.
3 Adjustment and installation
a) Disconnect the machine from the power supply before every adjustment.
b) The recommendations of the manufacturer must be followed when adjusting and installing the
tools.
c) The tools must be suited to the material being cut to assure safe and efficient sawing. The tools
must be correctly sharpened and installed.
4 Handling of tools
In order to avoid severe cuts, safety measures must be taken when handling the sawblades.
5 Intended use of the machine
The machine may only be used for processing all types of wood, panels and sheets with or without
plastic coating. The processing of plastic sheets and plastic is permitted with adapted saws. The
machining of ferrous and non-ferrous metals is strictly forbidden. In order to be able to maintain
the indicated sound values, all protective caps and means provided on the machine must be used.
This also applies to the dust emission and means that the machine must be connected to a dust
extraction system, whose air flow rate measured at the extraction opening on the machine is at least
20 m / sec. amounts.