Robland T-120 L, Руководство пользователя

Страница: 16 / 50

Fig 9
Spindle fence protections (fig 10)
Adjustments
- Adjust the fences as close as possible to the tools and adjust the horizontal wood-pusher (fig 10.2) according to
the width of the piece of wood. Adjust the vertical wood-pusher (fig 10.3) according to the height of the piece of
wood that is machined, but make sure the wood is placed as close as possible to the fences.
- When the protection is placed correctly, the wood-pushers exert enough pressure and the wood can be put
put against the fences while it is supported between the clamps.
- It is advised to use a push-stick while working with the spindle protection.
- If only part of the wood is machined (see “operating instructions”) it is easier to push the piece of wood against
the stop when the horizontal wood-pusher screen is turned away.
- To remove the entire system from the vertical axle, it is needed to remove the knob.
Fig 10
16