Robland D 630, Руководство пользователя

Страница: 16 / 40

Optional thicknesser table rolls (fig.8)
As an option the machine can be equipped with 1 or 2 rolls in the table.
In order to lower the rolls under the table simply pull the handle and lower, as
indicated on the pictogram.
fig.8
Maintenance
Attention: Always disconnect the machine from its power supply before starting
all maintenance works !!
The interior parts of the machine must be cleaned regulary in order to avoid an
accumulation of dust and woodchips.
Any possible deposit of resin on the various parts of the machine must be taken away
with a piece of cloth and a little solvent (petrol, kerosine or other product)
Never smoke or have any naked flame near the machine when using
inflammable products, this to prevent risk of fire and serious burns for the
operator !!
After removing the front, back, and side cover plates, all machine parts which need
maintenance are exposed.
The thread bars and posts of the table and the drive chains of both rise and fall of the
table and the feeding mechanism must be cleaned on a monthly base using a thin oil.
The use of a dust extractor system will most certainly extend the life of your machine.
The life of the motors can be extended by blowing out saw dust from the cooling fan
and from the motor body itself.
16