Robland D 630, Руководство пользователя

Страница: 13 / 40

Safety measures on the thicknesser
- Check iff the planer knifes are well tighened and secured. When this is not the case
the knifes by the centrifugal force will be ejected from the cutter block.
It is absolutely essential to read this manual before using the machine so you
know how to the machine works and what its limitations are.
- Always make sure that all safety devices are fitted to the machine and that the
machine is connected to a dust extraction system.
- Always wear suitable clothing, loose or torn clothes are very dangerous.
- Keep children away from the machine and out of the workshop.
-To avoid damaging your hearing we recommend to wear ear protection, when
working with the machine.
- The height of a planer knife must be 20 mm minimum!
Adjusting the depth of cut on the thicknesser (fig. 5)
The raise and fall of the thicknesser table is motor driven at 2 speeds up-and down by
pushing the switch S5 for the rise and fall at fast speed, the button S7 for the slow
speed rise and fall.
The position of the thicknesser table can be set at 1/10 mm
fig.5
position of the table
13