Robitronic R01502, Руководство пользователя

Страница: 4 / 28

4
Caution
To work your R/C with your models correctly and safely, read this manual carefully
and keep it in a safe way as a reference introduction in the future.
•
This product is only equipped for radio controlled models.
•
The usage of this product should be approved by local relevant law or
regulations.
•
We will not be responsible for the damages caused by unauthorized
modification, adjustment or replacement of parts of this product.
•
The manual may be altered without prior notice. Please contact us if you have
any corrections or clarifications that should be made in the manual.
•
Please pay more attention to the parts in this manual, which are marked with
„Warning“.
•
Because of disturbance, do not work your radio control system simultaneously
with others at the same frequency.
•
Before starting the transmitter, make sure the transmitter batteries are well
loaded. The voltage of transmitter batteries is never lower than 8,6 V, And
please check and confirm that the servos are all well and properly connected.
•
Please check and have a test on control surfaces to confirm the transmitter
handling of each part prior to each take off. The frequencies of the module and
the receiver should be the same.
•
Keep the radio system away from moist, high temperature and strong shake.
Do not clean the product with solvent.
•
The antenna does not touch anything else when power switch is turned on. Do
not leave this product and ist accessories within the reach of small children.
•
Please use this product according to our local relevant law or regulation, we
are not responsible for any incidents or damages.