Robitronic R01502, Руководство пользователя

Страница: 20 / 28

20
This mixing uses the 2nd channel to control the rear brakes and the 3rd channel to
control the front brakes. This function can be used in conjunction with the TH TRIM
and TH EPA to fine tune the power and balance of the overall braking system.
1. Press "ENTER" to see FUNCTION MENU
2. Use the +/- Keys to select the BR_MIX function and press ENTER.
3. Press ENTER to select a item.
4. Use the +/- Key to change the value.
5. Press EXIT to save and return to FUNCTION MENU, press EXIT again to return
to the Main Screen.
TERMS:
RATE - the rate of brake between 3rd channel and 2nd channel. Default value:
-120% ~ +120%.
EN - the start or close switch of this function. Select "ON" to start the function,
and "OFF" to close the function
2.15 MIX
This function allow customer to apply mixing between the steering, throttle and
channel 3 channels.There are main channel and sub-channel in the MIX selection.
The servo travel value of the sub channel is changed along with the change of the
main channel according to the setting rate.
1. Press "ENTER" to see FUNCTION MENU
2. Use the +/- Keys to select the BR_MIX function and press ENTER.
3. Press ENTER to select a item.
4. Firstly main channel setting. Select channel No. (ST, TH.AUX) by "+" or "-". L and
R separately correspond to the rate of Left and Right servos of the main channel mix
5.Secondly sub channel setting. Select channel No. (ST, TH.AUX) by "+" or "-". L and
R separately correspond to the rate of Left and Right servos selected in the sub
channel.
6. Third Press ENTER to select EN item. Use +/- to select "ON" to enable the
function and "OFF" to disable the function.
7. Press EXIT to save and return to FUNCTION MENU, press EXIT again to return
to the Main Screen.
For example: current setting:
ST: L 50% R 30%
TH: L 20% R 50%
EN: select "ON"
If throttle servo is 60% on the right and rudder servo is 50% on the right, and then
after setting, throttle servo is: 50*30%+60%*50%=45%. Throttle servo will act along
withthe action of STEERING servo.