Replacing the light bulb
Before replacing a light bulb, turn off the supply of power to the oven by turning off the circuit breaker connecting it to the
mains. Do not turn on the power to the appliance until after the bulb has been changed over & the cover replaced.
Remove the glass cover attached to the lamp holder by rotating the glass cover anti-clockwise. Remove the bulb and
then replace with a new bulb of a similar rating. Clean any oil and fats that might have collected around the thread of the
cover and replace (finger tighten only).
Voltage:
AC220V-240V
Wattage:
25W
Socket:
E14
Temperature rating:
300
°
C
How to remove oven door
For a more thorough clean, you can remove the oven door, proceed as follows:
• Open the door fully;
• Lift up and turn the small levers situated on the two hinges, be sure the lockers must be on position shown on step.1
• Pull the door towards you, pulling it out of its seat;
• Push the latch on both side and pull the bar out.
• Remove the door glass accordingly
• Assembly the door by following the above procedures backwards.
8
Maintenance and cleaning
