Installation -
continued
Technical information
Type
RHCC64T
Product Size (WxDxH)
580x510x50 mm
Rated voltage
220-240 V~ 50/60 Hz
Type of switch
Electronic sensors
Cooking Zones
Front left
200 mm, 1800 W
Rear left
165 mm, 1200 W
Rear right
200 mm, 1800 W
Front right
165 mm, 1200 W
Total Power (W)
6000W
Basic adjustment of the sensors to the environment
Upon each connection to the power supply the sensors of the appliance are automatically adjusted to the environment to
ensure their proper function, all displays turn on and are fully illuminated for a few seconds.
During the adjustment procedure the sensors must be free of any objects, otherwise the adjustment procedure will be
interrupted until such objects are removed from the sensor surface. During this period the regulation process of the
cooktop is impossible.
Hotplate functions
Ceramic glass cooktop is fitted with four hotplates. The cooktop surface is completely flat and smooth, without edges to
accumulate dirt.
Glass ceramic hotplate is not heated directly, but by return heat transmitted by the dish. This heat figures as “remaining
heat” after the hotplate is turned off. The induction hotplate generates heat from the induction coil, installed underneath
the ceramic glass surface. The coil creates a magnetic field at the bottom of the dish (which can be magnetized) which in
turn originates whirling flows of current which then heat the hotplate.
IMPORTANT!
In case sugar or other heavily sweetened substance is spilled on the hotplate, wipe it up immediately and carefully
remove the sugar residues with a scraper while the cooking zone is still warm, otherwise the hotplate may be damaged.
Avoid cleaning the cooktop while the cooking zones are still hot, as you may damage the cooktop.
