Installation
Built in Ceramic Cooktop Cut-out Dimensions
Note: In the case of units with base plinths a front grill is necessary
Which allows an input section of at least 100mm².
RHCC64T
A (mm)
580
B (mm)
510
C (mm)
560
D (mm)
490
E (mm)
50
F (mm)
10
G (mm)
50
H (mm)
4
Installing the Foam Gasket
Before inserting the appliance into the opening in the kitchen benchtop, the supplied foam
gasket must be attached to the lower side of the glass ceramic (glass) cooktop between
the benchtop and cooktop.
Do not install the appliance without the foam gasket!
The gasket should be attached to the appliance in the following way:
•
Remove the protective film from the gasket.
•
Then, attach the gasket to the lower side of the glass, approximately 2-3mm from the edge.
•
The gasket must be attached along the entire length of the glass edge and should not overlap at the
corners.
•
When installing the gasket, make sure that the glass does not come into contact the with any sharp
objects.
