
Instructions on use -
continued
Time of day
Select time of day mode
Step through the sequences of function with Touchpad SELECT until the symbol flashes.
Set time of day
Set time of day by SET (+) or SET (-) as described in this manual
Display: 0…..24h
Format: h: min
Set acoustic signal volume
Step through the sequences of function until the display shows the chosen acoustic signal L1, L2 or L3. The signal volume
can be increased res. Decreased with Touchpad SET (+) or SET (-). The acoustic signal sounds in the selected volume.
Acoustic signal volume L1 = low, L2 = medium, L3 = loud
Timer
(timer)
Set Timer
Selection as described earlier, until the symbol timer is flashing. The timer can be set with Touchpad SET (+) or SET
(-) acc up to a maximum of 99:00 min: sec
Timer runs down
5 seconds after setting the timer count down starts in steps of seconds to 0:00 min : sec. The display shows the symbol
timer . The remaining time is displayed continuously. While setting other functions the timer counts down covertly.
Modifying / Deleting timer
The remaining time can be changed anytime by using Touchpad SET (+) or SET (-). The countdown is deleted by setting
to 0:00 min : sec.
Timer has expired
The timer time has expired once the timer time has reached 0:00 min : sec. The symbol timer flashes and an acoustic
signal sounds.
•
Press any Touchpad, the timer mode terminates automatically.
•
The display shows the current time of day.
•
The acoustic signal and the timer symbol are switched off.
Cooking time
Set cooking time
Selection as described in earlier, until the symbol cooking time is flashing. The cooking time can be set with Touchpad
SET (+) or SET (-) acc. . The maximum cooking time is 23:59 h: min.
Cooking time runs down
5 seconds after setting the MANUAL mode changes to the automatic mode. The display shows the symbol cooking pot
and the current time of day, except the timer is active. The cooking time counts down covertly in steps of minutes.
Modifying / Deleting cooking time
Selection /Setting as described earlier. until the symbol cooking time is flashing. The cooking time can be changed with
Touchpad SET (+) or SET (-) acc.
Cooking time has expired
Once the cooking time was expired, an acoustic signal sounds. The relay contact opens and the display shows 0:00 h:
min. the symbol Man flashes.
After 7 min. at the latest or after touching any of the Touch pads the acoustic signal stops. The symbol Man flashes further
on.
Touching SELECT again, causes a change to the manual mode. The symbol Man is displayed continuously, the relay
contact closes and the current time of day is displayed except the timer is active.
12