
Instructions on use -
continued
Manual mode
The timer remains in manual mode if no cooking time or end of cooking time is selected. The relay contact is closed and
the symbol Man is displayed. The time of day is shown on the 7-segment display units the timer is active.
Automatic mode
If a cooking time or a end of cooking time is selected, the timer switches to automatic mode. The relay contact is closed
during the set cooking time. The symbol Auto is displayed until the cooking time or the end of the cooking time has
expired.
Touch Control
Touchpad SET (+) and SET (-)
•Touching SET (+) or SET (-) pad momentarily: touching pads momentarily increases res. Decreases time by
one minute (or the volume of the acoustic signal by one step).
•Touching SET (+) or SET (-) pad momentarily: permanent touching increases res. Decreases the speed of time
setting automatically.
•Rate of change: Permanent actuation for 2…5 seconds →app.3 min/sec Permanent actuation for more than
5 seconds
→ app. 20 min/sec
Using Touchpad SELECT allows stepping
through the sequences of function.
•Touching Touchpad SELECT momentarily, the next following function is chosen.
•Touching Touchpad SELECT permanently causes no automatic change. Touching
•Touchpad SELECT for more than 10 seconds an acoustic signal sounds and the select mode terminates
automatically.
Touch pads SET (+) and SET (-)
Within 5 seconds after selection of a function, the time or the signal volume can be set with Touchpad SET (+) or SET (-).
Functions
Start of a function
5 seconds after setting, a set time or volume is accepted and the chosen function starts automatically. The display shows
the current time of day, except the timer is active. In this case the display shows the remaining time of the timer.
Power ON / initial operation
After connecting the unit to the mains, the display shows the default time of day at12:00 h:min flashing. In order to avoid
the elements to automatically switch on after a power failure, the relay contact opens as soon as power returns. Touching
any pad the relay contact closes and the display shows the default time 12:00 h: min permanently.
The colon and the symbol continue to flash. It is possible now to set the current time of day as described in this
manual
11