ROBINHOOD HGA604FKSS, Инструкция по установке и эксплуатации

Страница: 12 / 14

Installation - continued
For connections to the mains power supply never use adapters, reductions or multiple power
points as these may overheat and catch fire.
In the event that installation should require modifications to the mains supply wiring system or if the power plug is not
suitable for the type of power point available, it is recommended that a qualified technician be called to carry out substitution.
The technician will also need to verify that the cross section of the electric cables on the power point match the appliances
power rating.
Replacing the Power Supply Cable
• Use the same type of power supply cable.
• The cable must be connected to the terminal block following the diagram (fig.23).
• Supply cables – Type H05V2V2-F resistance to temperatures of 90
°
C.
• Connection to good earth wiring system is absolutely essential.
• The manufacturer accepts no responsibility for any inconvenience caused by
failure to comply with this rule.
Descriptions and illustrations in this booklet are indicative only.
The manufacturer reserves the right to make necessary modifications where needed.
3.8 3.8
5.7 5.7
9.3 9.3
13.5