Reviewing
To review the results of the test the procedure is as follows:
Press the REVIEW key, the display shows:
Reviewing autotest
results. Use REVIEW
Press REVIEW key, display then shows a series of screens running through the test just performed. The
first screen displays the result of the first part of the test being reviewed, to view the remainder of the
test results, press REVIEW key for each screen until all the tests have been reviewed. If the stop key is
pressed during the review process the screen will revert to the main menu and the results will be lost.
Storing
To store the results of the test:
Press STORE key, the display will show:
Use the Keypad, then press
GO, or use the wand
After a few seconds the screen changes to show:
Enter the appliance num:
……..….
Enter the appliance reference number using the keypad.This number is normally a unique reference
number for the appliance under test, typically the serial number. If you are using PowerPAT Plus this is
where the optional dummy test code would be entered. If available the code may be entered using the
barcode wand, see manual for instructions in the use of the barcode wand. On completion press GO
The following screen will be displayed:
Use Keypad, then GO
or just GO to skip
The screen then changes to display the following:
Enter a note
……………………………..
If required a note on the tests may be entered into the records at this stage. (At this point users that are
using the tester in conjunction with Robin’s PowerPAT Plus Software can enter the relevant appliance
description and location code. On completion, or if no note is required press GO.
The display shows:
Results stored in
record 2
On completion press STOP to return to main menu.
Storage Type
To print a record, download a record or format a disk the procedure is as follows:
Press the PRINT/PC key the following is displayed:
Print results
YES/NO ?
SmartPAT 5500
16
7681 - 5500 PAT Manual 2002 7/26/02 11:14 AM Page 18
