Roberts R982, Руководство по эксплуатации

Страница: 22 / 32

21
Automatic preset system (APS)
This R982 is equipped with an Automatic Preset System that will
automatically select and assign memory presets to stations on the
waveband you select.
Turn on the radio by pressing power button (3).
Select FM or AM by pressing the waveband selector button (10).
Select memory preset location [1] using the memory select buttons
(8&9).
Press the memory button (6), ”MEMO” will flash in the display.
Press and hold down the select button (7) until ‘AUTO/MEM’ appears
and flashes in the display, release the select button (7).
Press the memory button (6) again. The R982 will automatically
begin to scan and store stations in memory presets. Any previously
stored stations will be overwritten.
Note: the R982 will commence APS from the frequency displayed
when APS is initiated. APS will end when the highest frequency on
the band selected is reached.
e.g. displays shows AM 909 when APS starts - R982 will scan
and store the first 9 stations in the range AM 909 to AM 1629.
displays shows AM 522 when APS starts - R982 will scan and
store the first 9 stations in the range AM 909 to AM 1629.
R982 Instruction Book.pm6 24/10/99, 14:13 22