Roberts R982, Руководство по эксплуатации

Страница: 10 / 32

Setting the time
When the batteries are installed for the first time the LCD (4) time
digits will flash indicating that the time needs to be set.
Note: The time is displayed in 12hr. format with AM and PM indicators.
Ensure that the power is turned off and the lock switch (2) is set to the
right hand (unlock) position.
Press and hold down the time button (10) until the hours digit flashes
in the display, release the time button.
Whilst the hours digit is flashing set the required hour using the time
adjust buttons (8&9).
Press and release the time button (10) the minutes digits will flash in
the display.
Whilst the minutes digits are flashing in the display set the required
number of minutes using the time adjust buttons (8&9).
Press and release the time button (10) to finalise time.
Note: Setting the hour must commence within the five seconds
during which the hours digit is flashing in the display. If the setting of
the hour does not commence within five seconds the display will
revert to showing normal time.
9
R982 Instruction Book.pm6 24/10/99, 14:13 10