Navigating your iPod
These steps can be used only when your iPod touch or iPhone is in Music
or iPod mode.
Please note: Some of the iPod control functions are only available using
the remote control or via the iPod's own controls. Not all iPods support
remote menu navigation.
1. Press and release the
Menu
button to navigate to higher level menus
on your iPod.
2. Use
the
Tuning Up
or
Down
buttons as required to move up or down
a menu screen on your iPod.
3. Press
the
Select
button to choose the highlighted on screen menu
item. If this item is a lower level menu item, you may then navigate
further using the
Tuning Up
or
Down
and
Select
buttons.
27
Docking your iPod
1. Ensure that the radio is in standby.
2. Slide the iPod docking adapter (see illustration) onto the iPod docking
arm so that it is securely seated.
3. Carefully place your iPod onto the docking connector, taking care that
the plug goes into your iPod and not behind it.
4. Press
the
On / Standby
button to switch on your radio.
5. To select the iPod mode press the
Mode
button until 'iPod' shows on
the display. If it was previously playing, your iPod will switch on and
continue playing from where it was previously stopped.
Note:
Your radio is able to recharge your iPod's internal battery. When
docked your iPod will use its backlight settings as con
fi
gured. If these
need changing, use the Settings menu on your iPod.
Docking arm
Dock connector for iPod
Docking adaptor
Playing a
fi
le on your iPod
1. When you have found the required item use the
Select
button on the
radio to start the iPod playing.
2. Adjust the volume to the required setting using the
Volume Up
and
Down
buttons on your radio.
3. To pause playback press the
Play / Pause
button. To resume playback
press the
Play / Pause
button again.
4. iPods do not have a Stop button (they use the Pause function). To play
an alternative selection, use the iPod menus to make the selection using
the
Play / Pause
button to stop playing the current item if needed.