19
Manual tuning - FM
1. Fully extend the telescopic aerial. The aerial should be fully extended
and positioned vertically for optimum reception.
2. Press
the
On / Standby
button to switch on your radio.
3. Press and release the
Mode
button until the FM band is selected.
4. Repeatedly press and release the
Tuning Up
or
Down
buttons to
tune to a station. The frequency will change in steps of 50kHz.
If the radio is tuned to a station of suf
fi
cient signal strength with RDS
information present, then the display may change to show the station
name.
5. When the waveband end is reached the radio will recommence tuning
from the opposite waveband end.
6. Adjust
the
Volume
to the required setting.
7. To switch off your radio press the
On / Standby
button.
Note:
If you
fi
nd that FM reception is poor, try repositioning the telescopic aerial.
Fully extend and position vertically for optimum reception. If you
fi
nd that
an FM broadcast has a lot of background hiss, this may often be reduced
by setting the radio into Mono reception mode for the current FM station.
Please refer to the section 'Stereo / Mono setting - FM' on page 21 for
further details.
3
4
4
2,7
6
6
