Operating your radio
1. Fully extend the telescopic aerial. The aerial should be fully extended
and positioned vertically for optimum reception.
2. Press
the
On / Standby
button to switch on your radio.
When
fi
rst switched on, the radio will be in DAB mode. After each use
the radio will remember the mode used and then switch on in that
mode the next time that it is used.
3. If this is the
fi
rst time that the radio has been used a quick scan of
the Band III DAB channels may be carried out. (The scan is normally
performed automatically when the clock is
fi
rst set page 8). If the
radio has been used before, the last used station will be selected. If
new radio stations are found, they will be added to the stored list of
stations.
4. When the scan is completed the
fi
rst station (in numeric-alpha order
0....9, A....Z will be selected. The display will show the station name.
5. If no signals are found then it may be necessary to relocate your radio
to a position giving better reception. You should then carry out a scan
to
fi
nd stations as described on page 13.
Note:
When
fi
rst switched on, the radio will set the volume to a moderately
high level, in case the broadcast is very quiet. After you have set the volume
using the
Volume Up
or
Down
buttons, the radio will remember the setting
that you have applied for the next time that it is used.
9
2
