5
Operating your clock radio
1. Place the wire antenna so that it is as straight as possible extending
either above or below the clock radio.
2. Press
the
On / Off
button to switch on your clock radio.
3. Press and release the
Band
button until the DAB mode is selected.
The display will show 'DAB Mode' for a few seconds.
4. If this is the
fi
rst time the clock radio is used a scan of Band III DAB
channels may be carried out (depending on whether scanning was
already completed in standby mode). If the radio has been used before,
the last used station will be selected.
5. When
fi
rst switched on, the
fi
rst station in the list of stations found will
be played. The display will show the station name on the upper line
of the text display and broadcast information on the lower line.
6. If the station list is still empty after the scan operation or if there are
no signals found it may be necessary to relocate your clock radio to
a position giving better reception, and then repeat the scan using the
Auto-tune facility (see 'Finding New Stations' on page 8).
Note:
that radio station name and frequency displays shown in this user
guide may differ from those that you see on your radio. Broadcasters may
change radio station names that are transmitted, and the frequencies
used for DAB and FM radio stations may not be the same in all parts of
the country.
2
3
BBC Radio 4
Just a minute...
DAB
Mode
