If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
16
3
1
Scan setting
Strong station
<
<
*
FM
Scan setting
<
<
Scan setting
All stations
<
<
4,5
4,5
4,6
Scan sensitivity setting - FM
Your radio will normally scan for FM broadcasts which are strong enough
to give good reception. However, you may wish the Auto-scan function
to also be able to
fi
nd weaker signals, possibly from more distant radio
transmitters. Your radio includes a local / distant option for the Auto-scan
function.
1. Press and release the
On / Off
button to switch on your clock radio.
2. Press and release the
Band
button until the FM mode is selected.
3. Press and hold the
Menu
button.
4. Press
the
Tuning Up
or
Down
buttons
until
'Scan setting'
shows on
the display. Press and release the
Select
button to enter the scan
sensitivity adjustment menu.
5. Press
the
Tuning Up
or
Down
buttons to switch between Local ('Strong
stations only') and Distant ('All stations') options on the lower line of the
display. The Distant option will allow the radio to
fi
nd weaker signals
when scanning.
6. Press and release the
Select
button to con
fi
rm your selection. The
Local or Distant setting is stored in the radio and remains in force until
changed or until a System Reset.
Note:
The initial setting (out of the box, or after a System Reset) causes
the radio to ignore weaker (or more distant) signals.
2
FM
Mode
