Roberts Gorden EP 301, Инструкция по установке, эксплуатации и обслуживанию

Страница: 26 / 38

EP-300 S
ERIES
P
UMP
I
NSTALLATION
, O
PERATION AND
S
ERVICE
M
ANUAL
20 of 31
FIGURE 17: Vertical Ventin g
9.7 Condensate Tee Assembly
The condensate tee assembly is composed of a tee,
draincap, and condensate trap.
If the system is designed in the condensing mode, then
the installation of a condensate tee assembly is
req
u ired. The condensate tee assembly, m u st be
installed on the inlet side of the p u mp assembly if there
is horizontal v enting of the p u mp, See Page 21, Figure
18 .
A condensate drain on the discharge side is req u ired
if there is v ertical v enting of the p u mp or if there is a
v ertical rise in the discharge line a w ay from the
p u mp. See Page 21, Figure .
The condensate tee assembly in the discharge line
can be eliminated if the discharge line is horizontal
thro
u gh the w all and pitched do w n at least 1/4" per
10' (6 mm per 3 m). This arrangement w ill permit
drainage of condensate thro u gh the p u mp and
o u tside v ia the horizontal (pitched) discharge line.
20 (51 cm)
Bird Screen
Optional
NOTE: V acuum loss
may occur when
using vent caps.
The use of
b ird screen
to cover vent terminations
is recommended.
Description Part Number
Tee 6" (15 cm) 01330204
Drain Cap 6" (15 cm) 02718852