Roberts Gorden COMPLETE HED Series, Инструкция по установке, эксплуатации и обслуживанию

Страница: 45 / 72

SECTION 8 : V
ENTING
39
FIGURE 25: Combustion Air Weather Vent (P/N 03700009)
Step A: Remo v e blo w er side access door from
b u rner by u nscre w ing the 4 w ing n u ts as sho w n.
Caref u lly remo v e door to gain access to comb u stion
blo w er.
Step B: Unscre w 3 lock n u ts along w ith 6 set scre w s
from blo w er side door as sho w n. P u ll comb u stion
blo w er from access door and remo v e fl u e collar.
While keeping blo w er gasket and bird screen in
place, replace comb u stion blo w er and tighten
lockn u ts pre v io u sly remo v ed in step A.
Step C: Apply silicone sealant aro u nd Comb u stion
Air Weather Vent flange. Caref u lly align 6 pre-drilled
holes on w eather v ent flange to 6 holes on access
door. Tighten 6 set scre w s pre v io u sly remo v ed in
step 2 to sec u re w eather v ent to b u rner door.
Step D: Reinstall access door and tighten w ing n u ts.
Lock Nuts
Set Screws
Flue Collar
Access Door
Wing Nuts
Combustion Air
Weather Vent
Apply Silicone Sealant
Under Flange
Step A Step B
Step C Step D
To be installed in place of fl u e collar for installations w itho u t fresh air v ent pipe.