Roberts Gorden COMPLETE HED Series, Инструкция по установке, эксплуатации и обслуживанию

Страница: 21 / 72

SECTION 6: H
EATER
I
NSTALLATION
15
SECTION 6: HEATER INSTALLATION
To ens u re yo u r safety, and comply w ith the terms of
the w arranty, all u nits m u st be installed in accor-
dance w ith these instr u ctions.
The gas or the electrical s u pply lines m u st not be
u sed to s u pport the heater.
Do not locate the gas or electric s u pply lines directly
o v er the path of the fl u e prod u cts from the heater.
The heater m u st be installed in a location that is
readily accessible for ser v icing.
The heaters m u st be installed in accordance w ith
clearances to comb u stibles as indicated on the rating
plate and in this instr u ction man u al.
The minim u m and maxim u m gas inlet press u res
m u st be maintained as indicated on the rating plate.
Typical installation config u rations are sho w n in
Figure 15 .
Expansion and contraction of the t u be dictates that
the minim u m s u spension lengths in the table on
Page 16, Figure 15 be maintained.
WARNING
Severe Injury Hazard
Secure burner to burner tube with nuts and
lockwashers.
Hang heater with materials with a minimum
working load of 75 lbs (33 kg).
Failure to follow these instructions can result
in death, injury or property damage.
WARNING
Cut/Pinch Hazard
Wear protective gear during installation,
operation and service.
Edges are sharp.
Failure to follow these instructions can result
in injury.