Robert Juliat D'ARTAGNAN 900 SNX, Инструкция пользователя

Страница: 15 / 25

900 SNX
DOSSIER TECHNIQUE
DECOUPES MSR 2500W
Section B - 7
Le c
onstruc
teur se r
éser
ve la possibilit
é de modifier ses ma
tér
iels sans a
vis pr
éalable
. L
es r
enseig
nemen
ts men
tionnés sur c
ett
e notic
e son
t donnés à titr
e indica
tif et ne saur
aien
t pr
ésen
ter de car
ac
tèr
e c
on
tr
ac
tuel
.
robert juliat
Route de Beaumont F 60530 Fresnoy-en-Thelle phone: +33 (0)3.44.26.51.89 - fax: +33 (0)3.44.26.90.79 - www.robertjuliat.fr
message displayed :
LAMP OFF
CHECK SECURITY
Return to 1.1 and follow the
procedure.
message unchanged.
Network transient failure : give the
off command, or switch off
the mains for 30 sec.
1.2. Untimely extinction of the lamp.
2. USING THE " ANALOG " MODE
2.1. The ballast and the CAD are on ;
the" lamp on" command is given,
but the lamp does not switch on.
Check the analog command cable :
the command has not been
received.
( refer to sections A - 5 & A - 11 )
message displayed :
RJ LAMP LIGHTING
TRY FAILURE
Return to 1.1 and follow the
procedure.
2.2. Untimely extinction of the lamp.
message displayed :
LAMP FAILURE
CHECK SECURITY
Command signal failure :
check the cable
( refer to sections A - 5 & A - 11 )
Message in
start-up display :
" RJ LAMP OFF "
Restart the
"LAMP ON"
procedure.
Return to 1.1 and follow the
procedure.
message unchanged.
message unchanged.
Network transient failure : give the
off command, or switch off
the mains for 30 sec.
Restart the
"LAMP ON"
procedure.
Restart the
"LAMP ON"
procedure.
Restart the
"LAMP ON"
procedure.