10
© 2020 Robern, Inc. 701 N. Wilson Ave. Bristol, PA 19007 U.S.A.
800.877.2376
www.robern.com
Installation or Assembly Instructions
Part no. 209-1329 rev. 03/25/20
Vesper Midline / Outline Light
STEP 4B - SURFACE MOUNT INSTALLATION, SIDE KITS
4. Drive the #10 Screws [SS676] provided with the Surface Mount Kit (sold separately) into the holes in the side kit brackets. Use a
penny (as detailed in figure 4 below) to set the depth distance.
5. Orienting the sidekit as shown below, insert the Screw Heads into the keyholes on the side of the upper and lower Light Brackets.
Note:
If the bracket is not oriented correctly, the side kit cannot be lowered into place and may fall resulting in damage.
6. Slide the Sidekit down into place.
Note:
If the Sidekit feels loose, move the sidekit back and forth to determine which screw feels loose. Lift and remove the sidekit from
the brackets and rotate the loose screw a 1/4 turn clockwise, repeating as necessary.
Note:
If the Sidekit does not lower into place, remove the sidekit from the keyholes and rotate the screws a 1/4 turn counterclockwise.
SS676
1/16" (1.52 mm)
or the thickness
of a penny.
Front
toward
user
Rear
toward
wall
4
5
