8
© 2020 Robern, Inc. 701 N. Wilson Ave. Bristol, PA 19007 U.S.A.
800.877.2376
www.robern.com
Installation or Assembly Instructions
Part no. 209-1329 rev. 03/25/20
Vesper Midline / Outline Light
STEP 4A - RECESS INSTALLATION
1. With the electrical cover(s) removed, support the cabinet on the edge of the recessed opening and feed the field wire(s) through the
field wire strain relief at the back of each enclosure(s).
2. Push the cabinet assembly into the recessed opening until the back of the cabinet flange is tight to the finished wall surface.
3.Using a level, level and plumb the products in the opening. Shim as necessary. Using a square, make sure the cabinet is
square in all axis.
4. Make the electrical connection(s) according to the electrical diagram on page 7.
Note:
Refer to your cabinet's Instructions to insure there are no additional steps required prior to proceeding.
5. Mount the cabinet in place using the #10 Screws [SS674] provided with the cabinet.
RO Width =
Width of c
width of lights - 3/4" (19 mm)
RO Height =
Height of cabinet - 3/4" (19 mm)
Corner block 2x4
4x corners
2-1/2" (63.5 mm)
