Strobe IP
6
The fixture is equipped with two pairs of rubber legs for standing on the floor or can be fastened on a non-
flammable surface by means of the Surface Mount Adapter Strobe IP
(optional accessories).
Before installing the Surface Mount Adapter Strobe IP
(1), remove both rubber legs holders (1) by unscrewing the
four screws (2).
Screw the mounting adapter (3) to the base of the fixture by means of the six screws M8x20 (4).
Ensure that the structure to which you are attaching
the fixture is secure.
Caution:
Overhead installation requires experience. Fixtures may cause severe injuries when crashing down! If you
have doubts concerning the safety of a possible installation, do not install the device and consult installation with
an expert.
Содержание Strobe IP
Страница 1: ...Version 1 2 ...
Страница 14: ...Strobe IP 14 Rump Down Rump Up Down Lightning Mode 1 2 4 ...
Страница 15: ...Strobe IP 15 Spikes For Duration and Rate timing serves the same values as for strobe ...
Страница 47: ...Strobe IP 20 ...