Strobe IP
10
d.Int.
--- select this function to adjust the display intensity (6-min.,100-max.).
turn
---
select this function to used to rotate menu 180 degrees from current orientation
.
di M.c.
---
Dimmer curve.
Use this menu item to set desired dimmer curve:
Lin
--- linear
SqL
--- square law
tnP.u.
---
Temperature unit.
Use this menu in order to display the fixture temperatures in desired units: °C or °F.
In.Po.
---
Init effect positions.
Use this function to set all effects to the desired positions to which they will move
after switching the fixture on (without DMX signal).
dF.SE.
---
Default Settings .
The menu item sets all fixture parameters to the default (factory) values.
4.4 Manual mode
Use this menu to control all channels via buttons of the control board.
Items in this menu depend on selected DMX mode.
To control fixture channels.
1.
Use the UP/DOWN buttons to find “ Man.C“ menu.
2.
Press the ENTER button.
3.
Use the UP/DOWN buttons to select desired effect (channel).
List of control channels:
“dinr“ - a coarse dimmer
“din.F” a fine dimmer
“dUrA.” – a duration
“rAtE.” – a rate
“SP.EF.” – special effects
“SP. FU.” – special functions
“Zo.EF.” – zone effects
“Z.E.SP.” – a zone effects speed
“CoL. 1” – a zone 1 intensity
“CoL. 2” – a zone 2 intensity
“CoL. 3” – a zone 3 intensity
“CoL. 4” – a zone 4 intensity
“CoL. 5” – a zone 5 intensity
“CoL. 6” – a zone 6 intensity
4.
Press the ENTER button and use the UP/DOWN buttons to set value , press the ENTER button to confirm it.
4. 5 Test sequences
Use this menu to run demo-test sequences without an external controller, which will show you some possibilities
of using the Strobe IP.
4.6 Stand-alone setting
Содержание Strobe IP
Страница 1: ...Version 1 2 ...
Страница 14: ...Strobe IP 14 Rump Down Rump Up Down Lightning Mode 1 2 4 ...
Страница 15: ...Strobe IP 15 Spikes For Duration and Rate timing serves the same values as for strobe ...
Страница 47: ...Strobe IP 20 ...