Strobe IP
5
2. Fixture exterior view
3. Installation
3.1 Connection to mains
Fixtures must be installed by a qualified electrician in accordance with all national
and local electrical and construction codes and regulations.
This device falls under class one and must be grounded!
The Strobe IP is equipped with auto-switching power supply that automatically adjusts to any 50-60Hz AC power
source from 100-240V (CE) or 100-277 V (US). The fixture must be connected to a non-dimmable power source in
order to avoid damage to its internal power supply and other electrical components.
Connect the fixture to the mains by means of inbuilt power cord with the plug.
3.2 Mounting the fixture
The Strobe IP can be arranged in any position/orientation without altering its operation characteristics. The LED
module can be tilted to desired position by means of the tilt lock. Use an Allen key 6 to adjust desired tilt position.
1. Head with LED array
2. Tilt lock
3. Base
4. Power and DMX connection
5. Rubber legs
Содержание Strobe IP
Страница 1: ...Version 1 2 ...
Страница 14: ...Strobe IP 14 Rump Down Rump Up Down Lightning Mode 1 2 4 ...
Страница 15: ...Strobe IP 15 Spikes For Duration and Rate timing serves the same values as for strobe ...
Страница 47: ...Strobe IP 20 ...