Robe Robin LedBeam 150, Руководство пользователя

Страница: 4 / 32

4
This fixture was designed for indoor use only, do not expose this unit to rain or use near water.
When choosing the installation spot, please make sure that the fixture is not exposed to extreme heat, moisture
or dust.
Do not block the lens array with any object when the fixture is under operation.
The cooling openings in head and base of the fixture should never be covered with cloth or other materials,
and never must be blocked.
This fixture should not be placed in a built-in installation unless proper ventilation is provided.
Only operate the fixture after having checked that the housing is firmly closed and all screws are tightly fastened.
Always use a secondary safety wire for overhead installation of the fixture.
Make sure that the area below the installation place is blocked when rigging, derigging or servicing the fixture.
The fixture becomes hot during operation. Allow the fixture to cool approximately 15 minutes prior to manipu -
late with it.
To avoid damage of an internal optical system of the fixture, never let the sunlight (or
other light source) lights directly to the lens array, even when the fixture is not working
Operate the fixture only after having familiarized with its functions. Do not permit operation by persons not
qualified for operating the fixture. Most damages are the result of unprofessional operation!
Please use the original packaging if the fixture is to be transported.
Please consider that unauthorized modifications on the fixture are forbidden due to safety reasons!
If this device will be operated in any way different to the one described in this manual, the product may suffer
damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like short -
-circuit, burns, electric shock, crash etc.