Robe ROBIN BMFL LightMaster Rear, Руководство пользователя

Страница: 6 / 25

6
3. Installation
The Robin BMFL LightMaster has to be installed by a qualified worker on
the following fixtures only: Robin BMFL FollowSpot, Robin BMFL Spot, Robin BMFL
Blade, Robin BMFL WashBeam.
Important!
Switch the Robin BMFL fixture to the Follow Spot Mode (option Soft) before
installing the Robin BMFL LightMaster.
Robin BMFL LightMaster Side
1. Switch the BMFL fixture to the Soft option of the Follow Spot Mode (Personality-->Follow Spot Mode -->Soft).
2. Disconnect the fixture from mains and place it on a flat surface (e.g. table). Move the head to a horizontal
position and lock the tilt movement.
3. Place the collar (1) of the handle (2) on the front part of the fixture head.
If you install the Robin BMFL LightMaster on the Robin BMFL WashBeam, remove the rubber ring (16) from
the collar (1).
4. Fasten the second side of the handle bar (2) to the head by means of two screws (8).
5. Secure the collar (1) on the head by means of the collar lock (2).
Note: There is a groove (17) in the handle bar (3). The groove allows movement of the collar (1) in the range of
8 mm in order to place the collar on the fixture head correctly (especially on the BMFL Spot/FollowSpot head).