Robe ROBIN BMFL LightMaster Rear, Руководство пользователя

Страница: 13 / 25

13
To assign an effect to the Jog-wheels and faders
1.Touch desired effect. Buttons (8/10/16/18) which activate jog-wheels (23/24/25/26) and buttons (20/22), which
matches faders (27/28) will start to flash.
2.Press desired button and selected effect will be assigned to its jog-wheel (fader).
Assigned effect is displayed in a yellow colour, free effects stay in a white colour.
3.Repeat steps 1 and 2 for needed effects.
4.Touch the [cancel] icon and than [back arrow] icon. The screen with effect faders will appear.
E.g.
Sensitivity of the jog-wheels assigned to the effects can be set at three levels: low, medium and high.
The levels of the sensitivity are marked in colour on the screen:
low level - green slider
medium level -yellow slider
high level- red slider
In order to switch a jog-wheel to desired level of sensitivity, press and hold its activating button (8/10/16/18)
until the colour of fader is changed.
Effects assigned to the four jog-wheels and two faders have a priority over DMX values coming from a DMX
controller
.
Only effects assigned to the jog-wheels will
appear on this screen.
Effects assigned to faders (27/28) will not
be shown.