Robe LiteWare HO2, Руководство пользователя

Страница: 13 / 25

LiteWare HO2
13
Menu Level 1 Menu Level 2 Menu Level 3 Menu Level 4 Menu Level 5 Menu Level 6
Cal.temp C. 2700K Red
: Green
C. 8000K Blue
White
Cal. Def.
No
Yes
Case SW Upd
6. Fixture menu
6.1 Fixture Address
Use this menu to set the DMX address and DMX mode of the fixture.
Set DMX --- Set DMX address . Select this submenu to set a DMX start address.
To set a DMX address.
1. Use the PREV/NEXT buttons to find “ Set DMX “.
2. Press the ENTER button.
3. Use the PREV/NEXT buttons to select desired start address.
4. Press the ENTER button to confirm the choice.
DMX Pres --- DMX preset . Select this menu item to set a desired DMX mode. Please refer to the chapter "DMX
protocol" for detail description of each DMX mode.
Note: After switching on, the LiteWare HO2 will automatically detect whether DMX 512 data is received or not.
If there is no data received at the DMX input, the display will start to flash with actually set address.
Wireless
---
Signal –
The item serves for reading of the level of DMX signal.
Unlink -
The item serves for unlinking the fixture from the transmitter.
6.2 Fixture information
Use this menu to read useful information about the fixture status.
To display desired information.
1. Use the PREV/NEXT buttons to find the “ InFo“ menu.
2. Press the ENTER button.
3. Use the PREV/NEXT buttons to select the required menu item.
4. Press the ENTER button to confirm the choice.
Pon Time --- Power On Time. Use the menu item to read the number of operation hours of the fixture.