Robe LiteWare HO2, Руководство пользователя

Страница: 17 / 25

LiteWare HO2
17
E.g. If “F.tim.“=5 second and “S.tim.“=20 second, effects will go to the desired position during 5 seconds and after
that they will stay in this position for 15 seconds before going to the next prog. step
1. 1. Use the PREV/NEXT buttons to find “ Sta Alone “ menu and press the ENTER button.
2. Use the PREV/NEXT buttons to select “ Pr. Edit “ menu and press the ENTER button.
3. Use the PREV/NEXT buttons to select a program you want to edit (Prog.1-Prog.3) and press ENTER button.
4. Use the PREV/NEXT buttons to select a desired program step ("Step 01" - "Step 40") and press ENTER
button.
5. Use the PREV/NEXT buttons to select a channel you want to edit and press the ENTER button.
List of editable items:
“Prg.En” -
a number of last program step (value 1-40). This value should be set before start
programming (e.g. if you want to create program with 10 steps, set Prg.En=10).
“Spec.” –
special functions
“Red” - red LEDs saturations
“Green“ - green LEDs saturations
“Blue“ - blue LEDs saturations
“White“ - white LEDs saturations
“C TC“ - a colour temperature correction
“C Wheel“ - a virtual colour wheel
“Strobe“- a strobe, shutter
“Dimmer“- a dimmer
“F.tim.“- a fade time, (0-25.5) seconds
“S.tim.“ - step time, value (0-25.5) seconds
“COPY“. – this item duplicates the current prog. step to the next prog. step. The item “Prg En” is increased
automatically.
6. Use the PREV/NEXT buttons to set a DMX value of the channel and then press the ENTER button.
7. Use the PREV/NEXT buttons to select next channel and press the ENTER button.
8. After having set all channels in the current program step, press the MODE button to go by one menu level
back and select another program step.
6.7 Special functions
rdM Low --- RDM Code .This menu item shows the first part of the RDM identification code.
rdM High --- RDM Code . This menu item shows the second part of the RDM identification code.
Wireless --- Signal – The item serves for reading of the level of DMX signal.
Unlink - The item serves for unlinking the fixture from the transmitter.
HoLd DMX --- If the function is on, the last received DMX values are held in case, that DMX data receiving was
interrupted (e.g. disconnected DMX controller).
Change password --- Use the munu to change your password. The password is required if you need to enter the
menu “Alarm”. Factory default password is “001”.
To change password.
1. Enter the “Change password” menu.
2. Enter the old password using the PREV/NEXT buttons and confirm with the ENTER button .
3. Set the new password using the PREV/NEXT buttons and confirm with the ENTER button. As password you
have to select one number from range 1-255.
4. Repeat the new password.